Flat belt

For testing

Brand (Manufacturer): 
Product Type: 
Material: 
Description: 
Megaflat belts are truly endless mandrel moulded, available in polyurethane or chloroprene rubber (pv- belts) , with polyester, aramide or cotton reinforcements.
 
Flat belt features make it ideal for the field of power transmission and distribution
 
This belt has the following properties:
- Good elasticity
- Can be used for small diameter pulley
- Size, accuracy, reducing high
- High-speed, efficient
- Reduce noise and vibration
- Anti-corrosion chemicals and ozone
- Large surface friction
 
 
more information can click here
 
 
conti polyflat flat belt open end pu lifting tape
  • conti polyflat flat belt open end pu lifting tape
  • fitness machine belt
Brand (Manufacturer): 
Product Type: 
Material: 
Reinforcement: 
Application: 
Description: 

For space-saving drive confi gurations in lift systems.

Properties:

  • wear-resistant
  • oil- and grease-resistant
  • resistant to fuel and benzene
  • hydrolysis-resistant
  • resistant to UV and ozone
  • temperature range from -30°C to +80°C (please request technical advice for temperatures below -10°C and above +50°C)
  • can be welded with thermoplastics
  • raw materials and production are silicone free
TFL / TL Series
Brand (Manufacturer): 
Product Type: 
Model: 
TFL / TL Series
Description: 

Physical Properties(e.g.TFL 3SH)

Tensile Strength: 135N/mm W (Test Speed 50 mm/min)

Elongation at Break: 20% (Ambient condition 20°C×60%)

Standard Elongation: 2%

Shaft load at e= 2%: 13.5N/mm W

Minimum Pulley Diameter: 35mm

Efficiency of Joint: Approx. 80%

Service Temperature Range: - 20 ~ +80°C

Coefficient of Friction: 0.7 ~ 0.8 (Green) Measured on a Steel Plate

                                    0.7 ~ 0.8 (Gray) Measured on a Steel Plate

Mass: 2kg/m²

Flat Belt GG series
  • Flat Belt GG series
  • Flat Belt GG series
Brand (Manufacturer): 
Product Type: 
Model: 
GG series
Description: 

Siegling Extremultus power transmission belts are durable, extremely tough, elastic, absorb vibrations and shocks and can be used at belt velocities of up to 100 m/s. Compared with other power transmission belts, they are easy to handle, extremely efficient and have a high level of synchronisation accuracy. Apart from traditional pulleys, they can easily handle bevel and cone drives and drive several shafts, even in different rotational directions.

GG

elastomer friction layer on both sides (normal pattern) for power transmission on both sides

 

 

Brand (Manufacturer): 
Product Type: 
Description: 

Physical Properties(e.g.SG 350)

Tensile Strength: 105N/mm W (Test Speed 50 mm/min)

Elongation at Break: 20% (Ambient condition 20 °C×60%)

Standard Elongation: 2%

Shaft load at e= 2%: 10.5N/mm W

Minimum Pulley Diameter: 25mm

Efficiency of Joint: Approx. 80%

Service Temperature Range: - 20 ~ +80°C

Coefficient of Friction: 0.3 ~ 0.4 (Green) Measured on a Steel Plate

                                    0.3 ~ 0.4 (Black) Measured on a Steel Plate

Mass: 0.9kg/m²

Main applications:

·Printing machine·Book binding machine·Light-load conveyor(Plate support)·Light load power transmission·Canning machine·Canning machine·Canning machine

 

Flat Belt L series
Brand (Manufacturer): 
Product Type: 
Model: 
L
Description: 

Main applications:

  • Machine tools such as automatic lathes and high-speed drilling machines
  • Tangential driving for open end spinning frame, high-speed spinning frame, etc.
  • Spinning machine
  • Cylinder driers and other driers
  • Winder
  • Router machine and other woodworking machines
  • Folder gluer
  • Light-load Conveyor
Brand (Manufacturer): 
Product Type: 
Model: 
UTTA
Description: 

Features:

  • Tensile strength: 25 N/mm
  • Elongation at break: 500 mm(Test speed: 50mm/min)
  • Ambient condition: 23℃@50%
  • Recommended elongation: 5 %
  • Working Load at 5%: 1.4 N/mm after 200 hrs.
  • Minimum Pulley Dia.: 25 mm
  • Temperature range: -20 to +60 °C
  • Coefficient of friction: 0.7 to 0.8 (paper) / 0.3 to 0.4 (steel)(blue side)   
  • Measuring condition: 7kPa@1mm/s 0.6 to 0.7 (paper) / 0.3 to 0.4 (steel)(black side)   
  • Ambient condition: 23°C@50%
  • Mass: 1.1 kg/m² 
Subscribe to RSS - Flat belt