Contitech

Brand (Manufacturer): 
Product Type: 
Model: 
laser tool
MEASURING INSTRUMENT
Brand (Manufacturer): 
Product Type: 
Model: 
Measuring instrument
Brand (Manufacturer): 
Product Type: 
Model: 
Pressure meter
D5M, D8M
  • D5M, D8M
  • D5M, D8M
  • D5M, D8M
Brand (Manufacturer): 
Product Type: 
Model: 
HTD D5M D8M
Material: 
Description: 

Features

 

Moderatrly oil-resistant

resistant to temperatures from -20℃ up to +100℃

(depending on application)

Non-ageing and ozone -resistant

Suitable for tropical climates

Electrically conductive(antistatic)

conti polyflat flat belt open end pu lifting tape
  • conti polyflat flat belt open end pu lifting tape
  • fitness machine belt
Brand (Manufacturer): 
Product Type: 
Material: 
Reinforcement: 
Application: 
Description: 

For space-saving drive confi gurations in lift systems.

Properties:

  • wear-resistant
  • oil- and grease-resistant
  • resistant to fuel and benzene
  • hydrolysis-resistant
  • resistant to UV and ozone
  • temperature range from -30°C to +80°C (please request technical advice for temperatures below -10°C and above +50°C)
  • can be welded with thermoplastics
  • raw materials and production are silicone free
Brand (Manufacturer): 
Product Type: 
Description: 

Properties:

  • The RopeCon® system ideally combines the advantages of tried-and-tested ropeway technology with the advantages of conventional conveyor belts.
  • A conveyor belt with corrugated sidewalls and integrated wheel sets runs on load-bearing cables over tower stations, and is thus lifted above the ground over rough terrain.
  • Minimum build up of dust and noise
  • Low operating and maintenance costs
  • Space requirements reduced to a minimum
  • Virtually no negative impact on the environment

 

Brand (Manufacturer): 
Product Type: 
Description: 

CONTI® vacuum filter belts separate solids and liquids. If desired, this is accompanied by rinsing, leaching or acid washing. The belts form a continuously circulating trough that holds and transports the filter blanket, the filter cake, the suspension and the washing solvent and removes the filtrate. The force of gravity and the vacuum generated cause the filtrate to be siphoned off via the belt grooves and through the drainage holes in the center of the belt.

The filtrate is drained off via a longitudinally positioned vacuum box and a defined belt perforation. The predried filter cake is shed on the bend pulley.

CONTI® vacuum filter belts are in service on vacuum belt filter units used in the processing of minerals, ores, chemicals, dyes, foodstuffs, coal and paper as well as in flue-gas desulfurization systems and in fertilizer production etc.

Product Range:

  • Belts in widths up to 4,800 mm
  • Completed with edge profiles, fluting, endless splice
  • Types available – normal, heat resistant, resistant to oil and grease

Properties:

  • good chemical resistance
  • high temperature stability
  • good aging- and sun-cracking-resistance
  • high-strength
  • low-elongation
  • laterally stable

 

Brand (Manufacturer): 
Product Type: 
Description: 

Properties:

  • Copes well with steeply rising topography
  • Eliminates need for transfer points thanks to good curve negotiability
  • Does not pollute because belt closed on return trip
  • Allows for two-way conveyor system: belt can be loaded in both directions; varying routing possible for trip out and back
  • Prevents dust emissions
  • Protects sensitive materials conveyed
  • Is lightweight and flexible, easy to install; self-centering between guide pulleys and support pulleys
  • Make minimal space demands
  • Allows for gradients of up to 35°
  • Reduces tensile load on belt by arrangement of several drive stations (with at least 90° encapsulation in curves).
  • Cleans itself
  • Can negotiate 180° curves with a radius smaller than 1 meter
Brand (Manufacturer): 
Product Type: 
Description: 

The technically sophisticated Mayoflex conveyor belts can be used to transport all types of bulk material at inclines of up to 90°.

Maxoflex conveyor belts are available in varying types: oil-, grease and heat-resistant as well as flame-retardant and with textile or steel-cord tensile members.

Belts with corrugated sidewalls are offered in three categories: light (M), heavy (MWS) and extra heavy with fabric reinforcement (MWSF). Diversely shaped cleats are available: in straight, angulate and fabric-reinforced form as well as with separate base.

The distinguishing features of the basic Maxoflex belt are an extra-high degree of traverse stability combined with good longitudinal flexibility. The spacing of the cleats can be varied to suit individual application needs.

Brand (Manufacturer): 
Product Type: 
Description: 
  • Moderately oil rsistant
  • Suitable for temperatures from -20 ℃  to 100 ℃
  • Non-ageing and ozone-resistant
  • Suitable for tropical climates 
Subscribe to RSS - Contitech